Evco RICS 4.30, Руководство пользователя

Страница: 53 / 104

41 RICS
Personalising the graphic display
Still in reference to Screenshot 7.2, you can select the Displays button and then the number of displays per device
(in the Displays field), as well as their position by modifying the parameters in the Display pos field (see
Screenshot 7.5).
This way you can freely place the displays relative to the main device coordinates.
Screenshot 7.5: Device image configuration window – Displays field.
7.2.3 Device label name
A text label is associated to each device and is displayed next to the image. It shows the name of the device.
You can change the colour and the position of this label relative to the device coordinates by going to Main
menu>Configure>Devices>Image respectively.
If you do not wish to see the device name we suggest you position the label off-screen.
7.2.4 Device configuration page
Here is a description of the pages that can be reached from Screenshot 7.2. That page is divided into sub-pages. The table
below shows the main settings they contain. You are advised to make some trial settings to better understand their
meaning. Some aspects have already been covered in this manual, while others will be examined further in the specific
sections.
Page Function
general this mainly allows the setting of the name and location of the device, understood as the position in
the virtual room
network describes the connection dettings to PC, Ports and the Protocol used and the device installation
methods on the PC as rgards the interface
image see paragraphs 7.2.2 and 7.2.3
alarm see Chapter 5
recorder mainly allows the setting of time intervals between one recording and another (also see Chapter 3)
advanced allows the setting of data display methods (charts ro tables) and the measurements units used by
the probes
web allows the setting of files to be sent by electronic mail