Evco EVC30S40, Руководство пользователя, Страница: 6 / 6

EVCO S.p.A. This document belongs to Evco; unless you are authorized by Evco, you can not publish this document.
Via Mezzaterra 6, 32036 Sedico Belluno ITALY Evco does not take any responsibility about features, technical data and possible mistakes related in this document.
Phone +39-0437-852468 • Fax +39-0437-83648 Evco does not take any responsibility about damages coming by the non-observance of additional information.
info@evco.it • www.evco.it Evco reserves the right to make any change without prior notice and at any time without prejudice the basic safety and operating features.
Evco S.p.A. • Code 104C30S40E02 • page 6/6
PAR. MIN MAX U. M. EVC30..00 EVC30..01 EVC30..02 EVC30..03 EVC30..04 EVC30..05 EVC70..00 EVC70..01 EVC70..02 EVC70..03
P13 0 100 % - - - - - - - - 30 30 30 30 - - - - - - - - - - - - - - - -
P13 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - • • - - - -
P14 0 1 - - - - - - - - - - - - 0 0 0 0 - - - - - - - - - - - - - - - -
P14 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - • • - - - -
P15 55 65 ° C - - - - - - - - 60 60 60 60 - - - - - - - - - - - - - - - -
P15 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - • • - - - -
P16 0 4 - - - - - - - - - - - - 2 2 2 2 - - - - - - - - - - - - - - - -
P17 P18 P19 min - - - - - - - - 20 20 20 20 - - - - - - - - - - - - - - - -
P18 0 P19 min - - - - - - - - 0 0 0 0 - - - - - - - - - - - - - - - -
P19 P18 999 min - - - - - - - - 199 199 199 199 - - - - - - - - - - - - - - - -
P20 0 60 s - - - - - - - - 20 20 20 20 - - - - - - - - - - - - - - - -
P21 0 240 s - - - - - - - - 10 10 10 10 - - - - - - - - - - - - - - - -
P22 0 1 - - - - - - - - - - - - 0 0 - - - - 0 - - - - - - - - - - - - - - - -
P22 - - - - - - - - - - - - - - - - - - - - - - - - - - - - • - - - - - - - - - - - - - - - - - - - -
P23 0 99 ° C - - - - - - - - 0 0 - - - - 0 - - - - - - - - - - - - - - - -
P23 - - - - - - - - - - - - - - - - - - - - - - - - - - - - • - - - - - - - - - - - - - - - - - - - -
P24 - - - - - - - - - - - - - - - - - - - - • • - - - - - - - - - - - - - - - - - - - - - - - -
P24 - - - - - - - - - - - - - - - - - - - - - - - - - - - - • - - - - - - - - - - - - - - - - - - - -
P24 0 1 - - - - - - - - - - - - - - - - - - - - - - - - 0 - - - - - - - - - - - - - - - -
P25 - - - - - - - - - - - - - - - - - - - - • • - - - - - - - - - - - - - - - - - - - - - - - -
P25 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - • - - - - - - - - - - - - - - - -
P26 - - - - - - - - - - - - - - - - - - - - • • - - - - - - - - - - - - - - - - - - - - - - - -
P26 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - • - - - - - - - - - - - - - - - -
P26 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - • - - - - - - - - - - - - - - - -
(1) the modification of the parameter affects all parameters whose unit of measurement is the degree Celsius or the degree Fahrenheit
(2) the unit of measurement depends on parameter P9
(3) the parameter cannot be modified.
DESCRIPTION
predefined value of the power supplied at the floor (percentage of P10;
only if P3 = 1); see also P9
firmware code (3)
enabling of the use temperature alarm (code “
H-t ”)
1 = YES
firmware version code (3)
temperature over which the use temperature alarm is activated
(code “
H-t ”); see also P14
firmware revision code (3)
size displayed when the instrument is on
0 = if P3 = 0,, top temperature
if P3 = 1, chamber temperature
1 = if P3 = 0, floor temperature
if P3 = 1, chamber temperature
2 = if P3 = 0, average temperature
if P3 = 1, chamber temperature
3 = if P3 = 0, top set point
if P3 = 1, work set point
4 = if P3 = 0, floor set point
if P3 = 1, chamber temperature
predefined cooking timer value
cooking timer minimum value
cooking timer maximum value
during activation of the buzzer on conclusion of the cooking timer count;
also see P21
time that passes between the activation of the buzzer and the conclusion
of the cooking timer count, see also P20
enabling of the quick heating function (only P3= 1)
1 = YES
firmware code (3)
temperature of the chamber above which the quick heating function is
interrupted (relative to the work set point, i.e. “work set point - P23”; only
if P3 = 1)
firmware version code (3)
firmware code (3)
firmware revision code (3)
size displayed when the cooking timer count is in progress
0 = size established with parameter P16
1 = cooking timer value
firmware version code (3)
firmware code (3)
firmware revision code (3)
firmware version code (3)
firmware revision code (3)