EVBox Smart Charging, Руководство по установке

Страница: 5 / 46

5
1.4 Explanation of safety symbols
The table below explains the safety symbols.
Class II equipment does not require an earth connection.
IK06
This device has been tested according to IEC 62262 and complies to
impact class 6 (impact energy: 1 Joule).
1.5 Residual safety risk
• The device’s housing has IK06 impact immunity level. Therefore, it is essential that the housing
is not damaged during installation.
• When there is visible damage to the device’s housing, it is recommended to replace the device
to prevent any hazardous situation to occur.
1.6 Maintenance
• Clean the outside only with a dry, clean cloth.
• Do not use abrasive agents or solvents.
1.7 Support
Only certified electricians or equivalent may install EVBox Smart Charging. If you have any
questions, please contact your local distributor.
In case your local distributor is unable to help you, you can contact EVBox Smart Charging at:
evbox.com/support
.