EVAPCO PulsePure Integrated Controller-2, Дополнение к инструкции по эксплуатации и установке

Страница: 14 / 26

12
5.0 OPERATION
The Integrated Panel operates continuously when it is powered. The Touch Screen is used to program
operating settings and set points. Controllers have been programmed by Evapco prior to shipment with default
settings. The settings but can be manually customized in the field as required. Keep track of any manual
programming changes made for future reference.
The Main Menu provides access to Inputs, Outputs and Configuration settings. Conducting sensor
calibration, assigning Input/Output channels, changing set points or timer values and configuring
operating modes are available from the main menu. After ten minutes of inactivity, the display will
return to the Home display. The Integrated panel is still controlling even while browsing through
menus.
5.1 Main Menu
All PPIC2 controller settings are accessed from the Main Menu. To view / adjust settings select the
Main Menu icon located in the lower left-hand corner of the Home display. PPIC panels are
configured for operation at the factory prior to shipment. Some item settings may be customized in the
field.
Caution: Changing designation or settings associated with some attributes may affect PPIC
operation. Please read this Technical Manual carefully before changing settings.
Inputs

Conductivity

Hi and Low Alarm Settings

Temperature

Flowswitch

Flowmeter (Water Meter 1)

Flowmeter (Water Meter 2)
Outputs

Bleed

Set Point and Dead Band

Timer

Frequency and duration of events

PreBleed

Bleed Lockout

Add Last Missed

Alarm

Selection
Configuration

Global Settings

Date

Time

Global Units of Measure

Language
Security Settings

Local Password
Display Settings
• Adjust Display (contrast, brightness)

Key Beep
File Utilities
• Data Log Range and Frequency
• Export Data, Event and System Logs
• Export/Import User Configuration
Controller Details

Controller Serial Number

Controller Software Version