– 8–
4.4 Joining a ZigBee network
Join successful
JIN
JIN
INS
Installation required.
See next page
Join process
is running
Joining was success-
ful Boost button flash-
es green and requires
confirmation
PRP
After the batteries have been inserted, PrP is displayed and the Spirit ZigBee prepares itself for the instal-
lation. The Spirit ZigBee is set in join mode at factory, this being indicated by a flashing radio symbol on
the LCD display.
If the Spirit ZigBee has successfully joined, the LCD display permanently displays the radio symbol and the
LED flashes green.
Commissioning process will continued by pressing Boost button.
The installation can be carried out when the LCD displays “INS”. Please continue with “4.5 Mounting on
the Heating Radiator” fort.
