background image

25

24

Spirit Z-Wave Plus

energy-saving controller 

Screw 

for adapter

WARNING - Do not use rechargeable batteries!

Never recharge batteries, do not short circuit them, do not 

take them apart - Risk of explosion! Remove dead batteries 

from the device immediately. 

Do not use old and new batteries together. Clean battery 

and device contacts before inserting if necessary. 

Keep batteries away from children. Avoid contact with skin, 

eyes and mucous membranes. In case of contact with batte-

ry acid, rinse the affected areas immediately with plenty of 

water, and seek medical attention immediately.

*

 When using the RAV adapter, you need the RAV Pin for the 

   extension of the valve stem.

SAFETY INSTRUCTIONS

• 

Spirit Z-Wave Plus is designed for use in buildings.

• 

Operate Spirit Z-Wave Plus only as described in the user 

manual.

• 

Spirit Z-Wave Plus should only be put to use in a dry and 

dust-free place, away from direct sunlight.

• 

Do not keep using the device when there is obvious 

damage.

• 

Spirit Z-Wave Plus may not be rebuilt, modified or 

opened.

SCOPE OF DELIVERY

EN

EN

2x AA batteries

RAV

RA

RAVL

RAV Pin*

WARNING / SAFETY

Содержание Spirit Z-Wave Plus











Отзывы: