Instruction Manual MM850402 ed. 08b
51
8.6 Software
configuration
GasConfig
software is a PC windows compatible program for configuring the 3000-4000 series
flue gas analyzers. You
can change all memory settings: displayed measurements pages, printed measurements layout, Alarms, Fuels
coefficients, measuring technical units, etc.
8.6.1 How
to
operate using GasConfig
When you run
GasConfig
, a 2 independent windows systems will be displayed on the PC monitor.
The window on the left is a parameter icon list. This list show all possible parameters for measured (O
2
, CO, Tgas, Draft,
etc.) and calculated measurements (CO
2
, Efficiency, etc.). Some of these may not be available in your instrument (it
depends by instrument model, installed cells, and options).
The window on the right is the program user interface. It is organized in function pages; you can select the page for
interesting parameters using the mouse.
A main menu bar allows you to load and save the configuration data, to the change the communication settings, for data
transfer to and from the analyzer.
WARNING
B
EFORE CONFIGURATION DATA TRANSFER TO AND FROM YOUR
PC,
BE SURE TO HAVE SELECTED THE
3000-4000
SERIES UNIT USING
THE
“INSTRUMENT”
OPTION ON MAIN MENU BAR
.
The available function pages are:
General
This page allows you to set the general parameters as engineering units, O
2
% reference
values, etc.
Pages
You can set up to 6 different pages in your instrument to display up to 36 different
measured and calculated values.
Printer
You can program the complete layout for report printing: header, measured parameters,
etc.
