manualshive.com logo in svg

Eurotrac HE18, Руководство пользователя

Поделиться
Скачать
Eurotrac HE18 Скачать руководство пользователя страница 86

Page 86/131

July 2021

HE18 | User manual

3.21 Filling the windshield washer system

•

Open the cap (

1

) of the windshield washer reservoir (

2

) and fill the 

reservoir with water and a cleansing agent.

NOTE

In the winter, windshield washer fluid with antifreeze added must be used.

3.22 Filling up the excavator

WARNING

When filling the excavator up, smoking, open flame and the use of other ignition sources are prohibited. The danger 
zone must be indicated with signs. The danger zone must have a fire extinguisher.

ENVIRONMENTAL INFORMATION

Spilled fuel must be absorbed by an oil absorbing fabric immediately. The contaminated oil binding agent must be 
disposed of in accordance with current environment protection regulations.

CAUTION

Only if there is no gas pump present may diesel oil be stored in approved jerry cans.

CAUTION

The excavator must be filled up on time so that the tank is not run dry. Air in the fuel system could damage the 
injection pump.

Содержание HE18




































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды