manualshive.com logo in svg

Eurotrac HE18, Руководство пользователя, Страница: 18 / 131

Поделиться
Скачать
Eurotrac HE18 Скачать руководство пользователя страница 18

Page 18/131

July 2021

HE18 | User manual

1. Danger: hot parts can burn!

•

Surfaces can be hot and inflict burns.

•

Do not cover openings, e.g. vents, and hot parts with your hands.

2. Attention: damage to parts is possible!

•

If using a wide or deep bucket, care must be taken when swiveling or 
retracting attachments that the bucket does not bump into the cab.

•

Read the operating instructions for the attachment.

3. Danger of death: possible entrapment!

•

A small safety distance with respect to the excavator and obstacles 
could block the escape route out of the danger zone. Becoming 
trapped by the excavator could result in serious injury or death.

•

Before you exit the machine, lower the bucket to the ground.

•

Activate the control lever, put the starter switch in the STOP position 
and remove the key.

4. Mortal danger: electricity!

•

When working in the area of electrical cables without maintaining an 
adequately safe distance, the machine could become electrified.

•

Keep a safe distance from electrical cables.

Содержание HE18




































































































































Отзывы:

Нет отзывов