manualshive.com logo in svg

Eurotrac HE18, Руководство пользователя

Поделиться
Скачать
Eurotrac HE18 Скачать руководство пользователя страница 22

Page 22/131

July 2021

HE18 | User manual

8.2

Protective Structure of the Protective Roof and Cab

NOTE

The excavator is equipped with a protective structure that protects the user from serious injury or death when 
tipping over or rolling over and objects falling down.

The protective roof and the cab are manufacture in accordance with current safety standards and tested as:
•

Rollover protective structure: ROPS (Roll Over Protective Structure)

•

Protection when tipping: TOPS (Tipping Over Protective Structure)

•

Operator protection: OPG (Operator Protective Guard)

In order to make sure maximum safety by means of this protective structure:
•

The safety belt must be put on when using the excavator.

•

Not structural modifications must be made to the protective structure.

•

If damage has occurred, go to your EUROTRAC dealer. (Do not repair yourself!)

•

Do not use the excavator without a protective structure.

The use of stone damage protection is recommended as protection against danger when using a hydraulic hammer 
or another attachment for demolition work where the material (e.g. asphalt) is removed and may fly off 
uncontrolled.

NOTE

If front protection is required, a EUROTRAC stone damage protection (accessory) can be mounted.

8.3

Emergency Hammer

If there is an accident with the excavator and the cab door or the windshield or side 
window cannot be opened, the user can break the windows with the emergency 
hammer (

1

).

CAUTION

When breaking the window, make sure to close your eyes and protect them with your arm.

Содержание HE18




































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды