Eurotherm TC3001 Скачать руководство пользователя

Страница: 52 / 79

Transit Inspector Pro

Working with Module

User Guide

5.1.1.1

Working with Protocol Tab Records

To view frame associated with the carriage number (to select it),

click it.

The corresponding carriage and train logs records will be marked. Monitor will enter the video
archive mode and will display a “stop frame” of the carriage corresponding to the carriage number.
The

Number

window will display this carriage number (see

5.2 Working in Number Window

page

Note:

If additional cameras was set for the analyse camera then all archives from the cameras are

supposed to be synchronized. One can manage synchronous playback by using playback controls of any
camera. See

SecurOS User Guide

for more information.

To browse/remove results from any recognizer,

click its button. The button will be lighted.

Warning!

Sort by recognizer cause output information difference only. All recognized carriage

numbers from all recognizers are gathered in database.

5.1.2

Working with Search Tab

Use

Search

tab to search carriage numbers in archive (e. g. by symbols, time interval, direction,

recognizer ID).

Note:

All search parameters are optional. One can combine it anyhow.

There is

Search form

on the top of the tab,

Search result

is below it. Output records are sorted by

trains ID (for more information see

5.1 Working in Protocol Window

on page

To browse all carriages,

holding

Ctrl

keyboard button click any train log record.

www.isscctv.com

Содержание TC3001
















































































Результаты поиска

Содержание TC3001

Отзывы:

Похожие инструкции для TC3001

Бренды по названию

Популярные бренды

Eurotherm TC3001, Руководство пользователя

Результаты поиска

Содержание TC3001

Отзывы:

Похожие инструкции для TC3001

Бренды по названию

Популярные бренды