Eurotherm TC3001, Руководство пользователя

Страница: 29 / 79

Transit Inspector Pro 30
Administrating Module
User Guide
(continued from previous page)
Property Description
Number scan area
Set a number localizator line position, i. e. top and bottom borders
of the number detection area (see figures
18 – 20 ).
Speed estimation area
Set top and bottom borders of the train estimate area. The area
should always be within the train area (see figures
21 – 23 ).
Use monitor for settings
visualisation
Select a monitor to check the defined parameters.
Set up using utility
Click this button to open the Visually setup recognizer parame-
ters utility (see 4.2.3.2.1 Visually Setup Recognizer Parameters
Utility on page 33 ).
Warning: before running the utility is is necessary to eliminate
distortion (see below)!
Localizer performance Choose the required quality of the localization.
Camera position
Side
Select from the list a train side (relative to its moving) where the
camera is established.
Camera reads numbers of Select from the list the train type which numbers will be read.
Lenght of car part visible
in video frame (meters)
Set a wagon part lenght visible in the frame (in meters). Uses
in algorithms of speed estimation, division train to wagons and
maneuvering accounting.
Train speed limit Set the maximum permissible train speed.
The figures below (figures 15 – 17 ) shows the examples of setting wagon number area.
Figure 15 : Optimum carriage number rectangle
www.isscctv.com