Transit Inspector Pro
45
Administrating Module
User Guide
•
Number detection and speed estimation
→
type in manually or set by the utility
(see
4.2.3.2.1 Visually Setup Recognizer Parameters Utility
on page
) the parameters
of number detection area.
8. Create the
Transit: consolidation module
object (see
4.2.5 Transit: consolidation module
on
page
) with the following parameters:
•
Set the data sources.
•
Select the
Main
checkbox if the object is a closer one or
Supplementary
— if its results
go to another consolidator.
•
Define a database (the
Database
object) to write results (if the object is set as a main
consolidator).
9. Create the
Computer
object with ID equal to NetBIOS name of computer to be used as operator
workstation, and set the following parameter:
•
Network address
→
IP address or DNS/WINS name of the computer within local TCP/IP
network.
10. Create
Screen
object.
11. Create
Monitor
object. In its properties window click
All
button to assign all cameras to this
monitor. Set the parameters:
•
X
—
0
,
Y
—
0
,
W
—
60
,
H
—
60
.
12. Create
Transit: operator GUI
object. Set the following parameters:
•
Display settings
→
select recognizers to display its results.
For each object set the
Monitor
object to display operator interface.
•
Number window
:
X
—
0
,
Y
—
60
,
W
—
60
,
H
—
40
;
•
Protocol window
:
X
—
60
,
Y
—
0
,
W
—
40
,
H
—
100
;
•
Display ... last trains
→
set number of trains to display in Protocol window.
•
Enable searching
→
select the checkbox to allow operator to search in database.
•
Allow number editing
→
select the checkbox to allow operator to edit recognized number.
13. Launch SecurOS client on operator workstation and specify video server IP address (or
DNS/WINS name) when prompted.
4.3.3
Distributed Server-Workstation Configuration
1. Make sure that either the
WINS
name identification mechanism is set in SecurOS or the
hosts
file (in the
\
System32
\
drivers
\
etc
Windows system folder) is not empty on the workstations
connected in the network.
Note:
To test name identification mechanism,
run the
ping
command on operator workstation and set
the application server or video server name as a parameter. Check the network traffic between the
computers.
www.isscctv.com
Содержание TC3001
Страница 1: ...User Guide ...
