Eurotherm TC3001, Руководство пользователя

Страница: 55 / 79

Transit Inspector Pro 56
Working with Module
User Guide
2. Select required direction check box/boxes.
3. Click
Search
button to begin search.
To search for carriage number by number:
1. Define the whole carriage number (or a part of it, see 5.1.2.1 Mask Search on page 56 for more
information) in Wagon number field.
2. Click Search button to begin search.
To browse all database:
1. Make sure that all recognizers are set in
Railways
field (
All railways
message or a list of
recognizer are displaying). If it is needed add other manually.
2. Set total recognizer working time in Time field.
3. Make sure that all directions are set in
Directions
field (
All directions
message or a list of
directions are displaying). If it is needed add other manually.
4. Take
wagon number
field empty.
5. Click Search button to begin search.
5.1.2.1 Mask Search
One can set the whole carriage number or part of it in the Carriage Number field. On part carriage
number setting unrecognized symbols may be replaced by special symbols.
Table 13
: Symbols for mask search
Symbol Description
(down accentuation
symbol)
Any figure even unrecognized one (e. g.
514018 6
).
*
(asterisk) One unrecognized figure (e. g.
50318**1
).
%
(percent symbol)
Any amount of figures till the end of the number (e. g.
50%
or
50318*%
).
5.2 Working in Number Window
Number
window displays recognized carriage number of the active record. This window consist of
the Number editable field.
www.isscctv.com