Eurotherm Chessell 4102C, Руководство пользователя

Страница: 13 / 52

Page 9
HA249928
Issue 15 Jly 06
100 MM CHART RECORDER USER GUIDE
Remove cassete by pressing down on, then pulling on the
retaining clip.
1
4
5
6
Insert new chart roll
Lift 'ears' to eject take-up
spool with used chart.
Remove inner tube
3
Pull off either end pinion
8
7
Slide the chart off the take-up spool, then push the
pinion fully back onto the empty spool.
10
Tear the corners off the chart, then
fold about 5mm of the point back
Insert the fold into the slot, then roll the
paper onto the take-up spool, and re-insert
the spool into the cassette.
11
9
Feed chart under
paper guide/chart tear-off.
Close the cassette top
12
Close the paper guide/chart tear off strip,
ensuring that the chart is 'square' with the
cassette.
13
Tension the chart.
14
Open cassette top
2
Open cassette top
2.4.2 Roll charts
Carry out the'Park procedure described in section 2.3 above. Once the chart has been replaced, return the cassette to
the recorder and check the pens' zeros/spans against the new chart as described in sections 3.2.4 and 3.2.5.