Eurotech REGATE-10-12-65G, Руководство пользователя

Страница: 99 / 118

ReliaGATE 10-12 User manual Rev. 2-1 16 How to install the product
16 H
OW TO INSTALL THE PRODUCT
The product is intended for professional use and must be installed by qualified personnel only.
The product must be installed in a secured location, accessible to authorized personnel only (for
example in a cabinet / technical compartment).
By default, the ReliaGATE 10-12 comes with a Mounting Bracket fastened on the bottom side. You can
use this Mounting Bracket to install the ReliaGATE 10-12.
Optionally, you can replace the Mounting Bracket with the DIN Rail Mounting Clip (optionally available).
You can then use this DIN Rail Mounting Clip to install the ReliaGATE 10-12.
See also:
l
"How to install the product using the Mounting Bracket" below
l
"How to replace the Mounting Bracket with the DIN Rail Mounting Clip or vice versa" on the next
page
l
"How to install/ remove the product on/ from a DIN Rail" on page 103
16.1 How to install the product using the Mounting Bracket
To install the product in place, complete the following steps:
1. See "Mechanical specifications" on page 97
2. Use the 4 slots available on the Mounting Bracket
3. Add all the necessary mounting hardware to safely fasten the ReliaGATE 10-12 in place according
to your installation requirements (for example use 4x M5 screws, with a minimum length of 15 mm).
Material, type, and length of the screws, and the maximum torque applicable, depend on
your installation requirements.
To simplify the installation, the ReliaGATE 10-12 is already provided with a Mounting Bracket.
The Mounting Bracket is made of 2 mm aluminum alloy 6061 T6.
In case of uncertainties contact the Eurotech Technical Support Team (see "How to receive
technical assistance" on page 17 ).
99 / 118