![Eurotech REGATE-10-12-65G Скачать руководство пользователя страница 111](http://html1.mh-extra.com/html/eurotech/regate-10-12-65g/regate-10-12-65g_user-manual_2440369111.webp)
ReliaGATE 10-12 User manual Rev. 2-1
Appendix 1: Advanced boot options
A
PPENDIX
1: A
DVANCED BOOT OPTIONS
1.1
Advanced boot options availability
The ReliaGATE 10-12 bootloader provides a number of advanced boot options, that allow a developer to
run different build artifacts.
The following advanced boot options are currently available:
Boot option
How it works
Notes
fitboot
1. It retrieves the production
fitImage
from
/boot/fitImage
in the
filesystem
2. It executes the
fitImage
3. By default, it boots the
kernel@1
and
fdt@reliagate-10-12-xx.dtb
partitions within the fitImage.
This is the default boot option,
which boots the production
kernel fitimage.
fitImagetftpboot
1. It retrieves a file called
fitImage
from the root of the tftp server
2. It executes the
fitImage
3. By default, it boots the
kernel@1
and
fdt@reliagate-10-12-xx.dtb
partitions within the
fitImage
.
This option is a fast and easy
way to test development
fitImages.
zImageboot
1. It retrieves the
zImage
from
/boot/zImage
and the device tree from
/boot/reliagate-10-12.dtb
within the filesystem
2. It boots both the
zImage
and the device tree.
This option is a way to boot a
production zImage and device,
should the default verified boot
system not be required.
zImagetftpboot
1. It retrieves
zImage
and
reliagate-10-12.dtb
from the root of the tftp
server
2. It executes the
zImage
and the
fdt
.
This option is a fast and easy
way to develop kernel images
and device trees.
If you are using a tftp boot option (fitImagetftpboot or zImagetftpboot), note that:
l
The system will use the tftp server specified by serverip and it assumes that a dhcp
address can be obtained through interface eth0. Always ensure that this ties in with your
network architecture before attempting to boot the tftp options
l
All runtime artifacts are loaded into RAM before execution, no execution from flash is
currently supported.
1.1.1
How to configure a boot option
To configure a boot option, you need access to the bootloader CLI.
1.1.2
How to gain access to the Bootloader CLI
To gain access to the bootloader CLI, complete the following procedure:
1. Connect a serial cable to the ReliaGATE 10-12 Console
2. Type
stop
before the timeout expires
111 / 118
Содержание REGATE-10-12-65G
