110140-20001, preliminary
Page 3
2 Getting Started
This section provides information on the initial use of the Player VIP development system.
2.1
Development System
The design of the Player VIP development system gets your video over IP system up and running
quickly. The default settings display video from a CF card to your VGA monitor with no
additional configuration required.
2.1.1
Components
The Player VIP development system consists of the following components:
•
Player VIP
•
CF card
•
12 VDC power adapter
•
Ethernet crossover cable
•
VGA cable
•
S-video cable
•
User's Guide
•
VideoCenter application (optional)
Please make sure you have received
all
the components before you begin your installation.
2.1.2
Connectivity
Connect the Player VIP Development System
To use the Player VIP, complete the following steps:
1.
Connect the VGA video output to your monitor.
2.
Insert the CF card.
3.
Connect the power input to the 12 VDC adaptor.
Upon boot, the power LED located on the front panel lights indicating power to the system. A
boot screen appears followed by the IP address and subnet mask for approximately 20 seconds.
