Eurotech AIM104-COM8 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 25

background image

AIM104-COM8 Technical Manual

ISO 9001
FM12961

Disclaimer

The information in this manual has been carefully checked and is believed to be accurate. Eurotech Ltd assumes no
responsibility for any infringements of patents or other rights of third parties, which may result from its use.

Eurotech Ltd assumes no responsibility for any inaccuracies that may be contained in this document. Eurotech Ltd makes
no commitment to update or keep current the information contained in this manual.

Eurotech Ltd reserves the right to make improvements to this document and/or product at any time and without notice.

Warranty

This product is supplied with a 3 year limited warranty. The product warranty covers failure of any Eurotech Ltd manufactured
product caused by manufacturing defects. The warranty on all third party manufactured products utilised by Eurotech Ltd is
limited to 1 year. Eurotech Ltd will make all reasonable effort to repair the product or replace it with an identical variant.
Eurotech Ltd reserves the right to replace the returned product with an alternative variant or an equivalent fit, form and
functional product. Delivery charges will apply to all returned products. Please check

www.eurotech-ltd.co.uk

for information

about Product Return Forms.

Trademarks

Windows NT, Windows 2000 and Windows XP are registered trademarks of the Microsoft Corporation.

All other trademarks recognised

.

Revision History

Manual PCB

Date

Comments

Issue A

V1.1

September 29th, 2004

First full release of manual.

Issue B

V1.1

September 25th, 2006

Minor modifications.

Issue

c

V1.1

December 21st, 2007

Minor updates, Eurotech rebranding.

© 2007 Eurotech Ltd.
For contact details, see page

.

«
1
2
3
4
...
»

Содержание AIM104-COM8


























Отзывы:

Нет отзывов

Похожие инструкции для AIM104-COM8

Бренд: QDI Страницы: 69

RouterBOARD 411

Бренд: 4gon Страницы: 2

Бренд: Intertec Components Страницы: 3

Advanced Socket 370

Бренд: BCM Advanced Research Страницы: 38

MITX-DNV0 Series

Бренд: Quanmax Страницы: 84

Бренд: Gigabyte Страницы: 31

PCM-8152 3rd Generation

Бренд: Aaeon Страницы: 6

conga-HPC/EVAL-Server

Бренд: Congatec Страницы: 54

Бренд: ST Страницы: 22

Бренд: Freetech Страницы: 79

Бренд: EVGA Страницы: 14

X58 PLATINUM SLI - Motherboard - ATX

Бренд: MSI Страницы: 74

DisplayPort VIP Input Board

Бренд: Lattice Страницы: 21

Бренд: California Eastern Laboratories Страницы: 34

Бренд: Gigabyte Страницы: 96

TLE986 Evalboard Series

Бренд: Infineon Страницы: 20

Бренд: MSI Страницы: 32

Бренд: Supero Страницы: 97

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды