30
Receiver
Connect Cinch connectors of the supplied
connecting cable (marked with "RECEIVER")
to the connection AV OUT (9) on the backside
of the receiver.
Connect the Scart connector of the supplied
connecting cable to the Scart jack of the
second TV device.
Infrared signal line
There are two possibilities to control AV source devices.
• The devices can be directly controlled via IR transmitter window of the transmitter (for this IR trans-
mitter window of the transmitter must be justified to the AV source devices and the infrared signal line
may not be connected).
• The devices are controlled via the infrared signal line (for this the infrared signal line must be connec-
ted).
Direct control via transmitter
Place the transmitter so that the IR transmitter
window can emit into the direction of the IR
receiver eye of the devices which are to con-
trol.
Observe for that the colours of connectors and
jacks:
Video = yellow
Audio right = red
Audio left = white
Follow the operating instructions on the second
TV device.
The IR transmitter window is on the front side of
the transmitter.
No barriers may be in the transmission range.
Read about the position of the IR receiver eye
of AV source devices in corresponding operat-
ing instructions.
