EUROPRO 30900, Руководство пользователя

Страница: 15 / 36

B3 L1 L2
B1
B2
B5
B4
A2 A1
202006-438A-ENG User manual - Compact-Pro 60 & 80 P15
4. USE OF THE MACHINE (continued)
4.5. WATER DOSER
B1 Power On / Power Off / Reset A1 Display of the actual flow rate
B2 Start / Stop / Resume dosing A2 Setpoint display (desired water volume)
B3 Impulse water addition L1 Power-on indicator light
B4 Increase of the dosing setpoint L2 Dosage run indicator light
B5 Decrease of the dosage setpoint
START / STOP
• When the power is turned on or the engine is running, the water meter indicates OFF.
• Pressing the ON / OFF button switches the water doser on.
• The display (A1) shows 0 and the display (A2) shows the value of the last setpoint.
WATER DOSAGE
• Set the desired amount of water with buttons (B4) and (B5). The display (A2) shows the setting in litres.
• Pressing the DOSAGE button (B2) starts water dosing, the light (L2) lights up during the entire dosing
time and the display (A1) increments the volume of water injected. When the set value is reached, the
water flow stops automatically and the indicator (L2) lights off.
• During the automatic cycle, pressing the DOSAGE button (B2) will pause the cycle. Pressing it again
resumes the cycle.
• Pressing the +WATER button (B3) will cause water to flow for as long as the button is held down. The
display (A1) adds the volume of water added to the displayed volume. This function is only possible
outside of the automatic water dosing cycle seen above.
If the water doser is ON and the engine is stopped, it will automatically return to OFF when
the engine is started. It is therefore necessary to avoid starting a dosing cycle during this time.