
19
OPERATION
The fans can be set to three different speeds: 0=off, I=low, II=medium and III=high. Both types
of fan are equipped with an oscillation function (45°).
If
- the fan has been fully assembled
- all connections have been properly secured
- all safety guidelines have been taken into account
you can use the fan.
Insert the plug into the socket.
Choose the output using the power button: 0=off, I=low, II=medium and III=high. The fan will
now begin to work.
If required, depress the swivel button: the fan will now begin to oscillate through an angle of
45°. Depressing and releasing this button will turn the swivel function (or oscillation function)
off.
If you would like to angle the fan upwards or downwards, the motor block can be angled
further up or down in relation to the foot. Before doing so, however, turn off the fan and
remove the plug from the socket! Undo the black setting button slightly, set the fan to the
desired position and tighten the button.
In order to turn the fan off, set the power button to 0 (off). If you wish to turn the device off for
longer than just a few minutes, you must also remove the plug from the socket.
CLEANING AND MAINTENANCE
Switch the fan off and remove the plug from the socket if you wish to clean the device or
perform maintenance.
The fan only needs general, exterior maintenance. Dust it regularly with a soft cloth or duster or
use a vacuum cleaner with a soft brush to clean. If it is very dirty, open the grille and clean
grilles and blades using a soft, damp cloth and a mild household cleaning agent. Dry everything
thoroughly and allow the fan to dry properly before reassembling and using again. Ensure that
water does not come into contact with anything other than the grille and blades. Never rinse or
spray the fan!
In order to prevent material discolouration or deformities, never use aggressive or corrosive
(cleaning) products.
If the fan is to be stored at the end of the season, repack in its original packaging: this offers the
best protection. Store it in a safe and dry place that is not subject to extremes of heat or cold.
PROBLEMS AND SOLUTIONS
The fan blades do not rotate even though the device is switched on
Is the plug in the socket?
Is there power to the socket?
Is the button positioned on I, II or III?
Is the blade blocked, e.g. by damage, a deformity on the grille or a foreign object?
Содержание VSM16
Страница 2: ...2...
Страница 27: ...27...
Страница 28: ...28 EUROM Kokosstraat 20 8281 JC Genemuiden e mail info eurom nl www eurom nl...