
18
9, 10 - Place the back protective
grille (E), over the motor spindle (G)
with the handle at the top and
secure it to the motor housing using
the 4 screws (C).
Undo the screw on the protruding
drum on the fan turbine (B) slightly.
Slide the fan turbine over the motor
spindle so that the screw lies on the
flattened section of the spindle (front
of fan turbine same as front of
spindle).
Tighten the screw.
Now, place the front protective grille
(A) in front of the fan turbine.
To do
so, remove the locking screw and bolt that secures the base unit and place the top bracket over
the rear grille.
Now insert the locking screw on the bottom through both halves of the grille and
tighten using the bolt.
Finally, secure the 2 x 2 clips on the sides over both grille halves.
Your fan is now ready for use.
DIAGRAM OF COMPONENTS VTM12
a = protective grille front
b = fan turbine
c = fixing screw turbine
d = fixing screw grilles
e = protective grille back
f = screws grilles back
g = motor axle
h = swivel button
i = motor casing
j = power button
k
– electrical cable
l = setting button
m = grill clip
ASSEMBLY VTM12
As VSM16 from point & Fig. 4.
Содержание VSM16
Страница 2: ...2...
Страница 27: ...27...
Страница 28: ...28 EUROM Kokosstraat 20 8281 JC Genemuiden e mail info eurom nl www eurom nl...