EN
110
BEFORE CALLING YOUR AFTER SALES SERVICE
Water fl ow noise:
Normal fl ow noise of water fl owing to the evaporation container
during defrosting. This noise can be heard during defrosting.
Air Blow Noise:
Normal fan noise. This noise can be heard in fridges during
normal operation of the system due to the circulation of air.
If the edges of fridge cabinet that the door joint contact are warm;
Especially in summer (hot weather), the surfaces that the joint contact may get warmer
during the operation of the compressor, this is normal.
If humidity builds up inside the fridge;
• Are all food packed properly? Are the containers dried before placing them in the
fridge?
• Is the fridge's door opened frequently? Humidity of the room gets in the fridge when
the door is opened. Humidity build up will be faster when you open the door more
frequently, especially if the humidity of the room is high.
If the door is not opened and closed properly;
• Do the food packages prevent closing of the door?
• Are the door compartments, shelves and drawers placed properly?
• Are door joints broken or torn?
• Is your fridge on a level surface?
Recommendations
• To stop the appliance completely, unplug from main socket (for cleaning and when
the door is left open)
Tips for saving energy
1. Install the appliance in a cool, well ventilated room , but not in direct sunlight and not
near a heat source (radiator, cooker.. etc). Otherwise use an insulating plate.
2. Allow warm food and drinks to cool down outside the appliance.
3. Cover drinks or other liquids when placing them in the appliance Otherwise humidity
increases in the appliance. Therefore, the working time gets longer. Also covering
drinks and other liquids helps to preserve smell and taste.
4. Try to avoid keeping the doors open for long periods or opening the doors too frequently
as warm air will enter the cabinet and cause the compressor to switch on unnecessarily
often.
5. Keep the covers of the diff erent temperature compartments (crisper, chiller ...etc )
closed
6. Door gasket must be clean and pliable. Replace gaskets if worn.
Содержание RBE 27ETC 1D FV
Страница 111: ...52276912 ...