INSTRUCTIONS FOR USE
5 - ENGLISH
Control lock
The control lock is useful both to prevent children from switching on the oven or prevent
settings being changed while cleaning the
display
.
It is engaged/disengaged by touching the symbol for a few seconds until the
symbol appears on the display.
Faults
If the display shows the message “
ERR
” and a buzzer sounds, it means that there is a
malfunction. Please contact the technical assistance service.
Energy saving
The automatic energy saving system becomes active when the programmed cooking
period is more than one hour (both for programming only the end of cooking time and
at the start and end of cooking ).This system switches off the heating elements a few
minutes earlier, without damaging the quality of the cooking and thus saving energy.
The automatic activation of this function is shown on the display by the message “
Eco
”.
Power cut
Following a power cut of about 10 minutes, the oven will resume its functions normally.
If the power cut is longer, when the power does return, the display goes back to stand-
by with the clock at zero. In this case, you must reset the time, cooking function and
cooking programme.
Safety thermostat
It cuts out the electric supply for preventing possible overheatings when the appliance
is not correctly used. In this case, wait that the oven cools down before using it again.
On the other hand, if a fault is present on the appliance’s components, we advise
calling the
Technical Assistance Service must be contacted.
Cooling motor
The oven is equipped with a cooling motor for the internal components and the control
panel. This device automatically comes into operation when the temperature inside the
oven exceeds a pre-established value and remains on, after turning off the oven, until
said temperature is lowered.
