CLEANING AND MAINTENANCE
All the glass used in this appliance has undergone a special safety treatment. In
the case of breakage, the glass shatters into small square and smooth pieces
which are not dangerous because they are not sharp.
Please take care and avoid thermal shocks for the glass pane, for example, never
start cleaning when it is hot.
Replacing the oven light
After having disconnected the oven from the
power supply, unscrew the glass protection cap
and then the bulb and replace it with another
one suitable for high temperatures (300°C /
E14). Remount the glass cap and reconnect the
oven.
Self-cleaning catalytic panels (optional)
Some models of the oven can have self-cleaning panels, covering the walls,
mounted in the muffle. If they are not already supplied, you can contact your dealer
or Service Centre to purchase them.
These special panels, to be fixed to the side walls and the rear wall, are covered
with a special micro-porous catalytic enamel that gradually oxidises and vaporises
splattered oil and fat, eliminating them during cooking at over 200° C. If after
cooking very greasy or fatty food, the oven is not clean, switch it on empty at the
maximum temperature for the time necessary (max. 1 hour) for it to become clean
again. The self-cleaning panels must not be washed or cleaned with abrasive
products or products containing acids or alkalis, but only regularly wiped with a
cloth soaked in water.
15 - ENGLISH
