51701970_V_1_3.DOC
22/47
Addressing
Each device occupies 4 channels. To ensure that the control signals are properly directed to each device,
the device requires adressing. This is to be done for every single device by changing the DMX address as
set out in this table.
As soon as you will connect the data cable with the DMX-socket, the display shows "DMX Add". Adjust the
desired DMX-address by means of the Up/Down keys.
The starting address is defined as the first channel from which the device will respond to the controller.
Please make sure that you don’t have any overlapping channels in order to control each device correctly and
independently from any other device on the DMX data link. If two, three or more devices are addressed
similarly, they will work similarly.
Occupation of the DIP-switches:
Device 1 - channels 1-4
On
Off
DMX-starting
address
Projector number
& channels
Off
Device 2 - channels 5-8
On
Off
Device 3 - channels 9-12
On
Off
Device 4 - channels 13-16
On
Off
Device 5 - channels 17-20
On
Off
1
2
4
8
16
32
64 128 256
DIP-switch no.
1
2
3
4
5
6
7
8
9
Setting the DMX-
starting address:
DMX-protocol
Control channel 1 - Control modes
Data:
Modes:
232-255
Maximum volume
128-231
Timer
14-127
Volume control
0-13
Off (
stop smoking
)
