19
•
EN
- - -m
Danger due to electricity
•
The device is suitable for indoor use only. Do not use it outdoors. Never expose it to rain or moisture. Do not store
it in rooms exposed to moisture.
•
To reduce the risk of electric shock, do not open any part of the device. There are no serviceable parts inside the
device.
•
Only connect the device to a properly installed mains outlet. The outlet must be protected by residual current
breaker (RCD). The voltage and frequency must exactly be the same as stated on the device. If the mains cable
is equipped with an earthing contact, then it must be connected to an outlet with a protective ground. Never
deactivate the protective ground of a mains cable. Failure to do so could possibly injure the user.
•
The mains outlet must be easily accessible so that you can unplug the device quickly if need be.
•
Never touch the mains plug with wet or damp hands. There is the risk of potentially fatal electric shock.
•
The mains cable must not be bent or squeezed. Keep it away from hot surfaces or sharp edges.
•
Never pull the mains cable to disconnect the mains plug from the mains outlet, always seize the plug.
•
Unplug the device during lightning storms, when unused for long periods of time or before cleaning.
•
Do not expose the device to any high temperatures, direct sunlight, dripping or splashing water, strong vibrations
or heavy mechanical stress.
•
Do not place any objects filled with liquids on the device.
•
Do not place any open sources of fire, such as burning candles, on or directly next to the device.
•
Make sure that objects cannot fall into the device, in particular metal parts.
•
Only have repairs to the device or its mains cable carried out by qualified service personnel. Repairs are required
when the device or the mains cable is visibly damaged, liquid has been spilled or objects have fallen into the
device; when the device has been exposed to rain or moisture, has been dropped or malfunctions occur.
•
Cleaning of the device is limited to the surface. Make sure that moisture does not come into contact with any
areas of the terminal connections or mains voltage control parts. Only wipe off the product with a soft lint-free and
moistened cloth. Never use solvents or aggressive detergents.
Warning – risk of burns and fire
•
The admissible ambient temperature range for the luminary is -5 to +45°C. Do not operate the device outside of
this temperature range.
•
The housing temperature of the spot can be up to 60°C during use. Avoid contact by persons and materials.
•
Do not illuminate surfaces within 10 cm of the luminary. This value is indicated on the device by the
symbol.
•
Do not use the devices near highly flammable materials. Always place the devices at a location where sufficient
air circulation is ensured. Leave 50 cm of free space around the devices. Never cover the air vents of the
housings.
Caution – material damage
•
Lighting effects are not designed for permanent operation. Consistent operation breaks will ensure that the device
will serve you for a long time without defects.
•
Never switch the device on and off in short intervals. This will considerably reduce the service life of the device.
•
If the device has been exposed to drastic temperature fluctuation, do not switch it on immediately. The resulting
condensation may destroy the device. Allow the device to reach room temperature before connecting it. Wait until
the condensation has evaporated.
•
Please use the original packaging to protect the device against vibration, dust and moisture during transportation
or storage.
•
If a serial number label is affixed to the device, do not remove the label as this would make the warranty void.
