23
•
EN
OPERATION
WARNING!
Operating conditions
Switch on the hoist only if the Space Ball is installed.
Switch on the hoist in a vertical position only.
The built-in winch system automatically resets with each start. When the hoist has not been installed in
a vertical position or the Space Ball has not been installed, the cable could get entangled, causing
damage to the winch system and rendering the warranty void.
WARNING!
Start-up sequence
Before switching on the hoist always make sure that:
• the hoist has been installed in a vertical position.
• the Space Ball has been installed and secured by means of the carabiner.
• the hoist rope is not loose.
• nothing hinders the hoist’s movement.
Setting the DMX starting address
To be able to operate the hoist with a DMX controller, the DMX starting address must be set.
The starting address
depends upon which DMX controller is being used. Please refer to the controller’s documentation.
1
Press the
MENU
button to indicate the first menu item
Addr
. Confirm with
ENTER
.
2 Use the buttons ▲ and ▼ to set the address and confirm with
ENTER
. The display shortly inserts
SAVE
.
Note: Please make sure you do not have any overlapping channels in order to control each device correctly and
independently from any other fixture in the DMX chain. If several devices are addressed similarly, they work
synchronously.
Functions in DMX mode
Channel
Value
Function
Description
1
000-255
Brightness Red
2
000-255
Brightness Green
3
000-255
Brightness Blue
4
000-255
Overall brightness
5
000-009
Blackout
010-019
No function
020-209
Strobe effect
Increasing speed
210-255
No function
6
000
Winch locked
When channel 8 is set to value 0
001-255
Hoist
From top to bottom
7
000-255
Hoisting speed
Decreasing speed
8
000
Winch locked
When channel 6 is set to value 0
001-239
Unlock winch
Unlock winch before using channel 6
240-245
Reset winch
Resetting the winch to the starting position twice
ensures an accurate result: Automatically by
switching on the hoist and with channel 8.
246-255
Unlock winch