00066709.DOC, Version 1.1
17/23
DMX
F
ter
un Down Up En
1
2
3
DMX In
DMX Out
1
2
3
Microphone
DMX occupation:
1: Ground
2: Signal (-)
3: Signal (+)
Fuse: F 3 A, 250 V
Sensitivity
Control Board
1
2
3
4
5
6
7
DESCRIPTION
Features
Powerful LED PAR-64 spot with 5 W LEDs
Operable in stand-alone mode or via DMX • DMX512 control possible via any commercial DMX controller
(occupies 5 channels) • Sound-control via built-in microphone • Adjustable microphone sensitivity via rotary
control • Functions: Static colors, RGB color blend, internal programs, adjustable microphone sensitivity,
dimmer and strobe settings via DMX, Master/Slave • Equipped with 36 x 5 W LEDs: 12 x red, 12 x green, 12
x blue • Beam angle approximately 20° • Locking possibility at the mounting bracket • Comfortable
addressing and setting via control panel with LED display and four operating buttons • Ready for connection
via power cord with safety-plug • Silver or black housing available
Overview
1. DMX-Controllamp
2. Microphone
3. Rotary
control
4. DMX
In
5. DMX
Out
6. LED-screen
with
operatingbuttons
( Fun, Down, Up, Enter)
7. Fuse
INSTALLATION
Overhead rigging
DANGER TO LIFE!
Please consider the EN 60598-2-17and the respective national standards during the installation!
The installation must only be carried out by an authorized dealer!
The installation of the device has to be built and constructed in a way that it can hold 10 times the weight for
1 hour without any harming deformation.
The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net.
This secondary safety attachment must be constructed in a way that no part of the installation can fall down
if the main attachment fails.
When rigging, derigging or servicing the fixture staying in the area below the installation place, on bridges,
under high working places and other endangered areas is forbidden.
