00041118.DOC, Version 1.1
11/12
INSTALLATION
Replacing the lamp
DANGER TO LIFE!
Only install the lamp with the device switched off!
Unplug from mains before!
The lamp has to be replaced when it is damaged
or deformed due to the heat!
CAUTION!
Before replacing the lamp, unplug mains lead and let the lamp cool down (approx. 5 minutes).
During the installation do not touch the glass-bulbs bare-handed! Please follow the lamp manufacturer's
notes!
Do not install lamps with a higher wattage! Lamps with a higher wattage generate temperatures the device
was not designed for. Damages caused by non-observance are not subject to warranty.
For the installation, you need one 230V/300W R7s 117mm pole burner lamp.
Procedure:
Step 1:
Remove the lamp cover from the lamp.
Step 2:
If replacing the lamp, remove the old lamp from the lamp-socket.
Step 3:
Insert the new 230V/300W R7s 117mm pole burner lamp into the lamp-socket.
Step 4:
Replace the lamp cover on the lamp.
Protective shield cannot be removed without tools.
Do not operate this device with lamp cover removed!
