00094572.DOC, Version 1.0
14/18
Overview
(1)
Remote control
(2)
Flower effect
(3)
Escape nozzle
(4)
Fluid tank
(5)
Venting slots
(6)
Mounting bracket
(7)
Fixation screw
(8)
Housing
(9)
Attachment eyelet
(10)
Rubber foot
(11)
Fluid level display
(12)
Remote control
(13)
SMOKE Power switch
(14)
EFFECT Power switch
(15)
Fuseholder
(16)
Power supply
STARTING OPERATION
Remove all packing materials from the shipping box. Make sure that there are no packing remnants at the
fog output nozzle.
Install the device on a plane surface.
Unscrew the tank cap and fill the tank with fog fluid. Tightly close the tank again.
The fluid tank of the device needs to be filled with smoke fluid before starting up operation and always
disconnected from the mains as fluid could be spilled.
CAUTION!
Always disconnect from the mains before filling the machine. Only use water-based fluids.
We recommend high-quality EUROLITE fluids. Never add flammable liquids. If fluid gets
inside the machine, have it checked by skilled personnel before it is operated.
