EuroLite DYNAMIC FOG 2000, Руководство пользователя

Страница: 22 / 28

www.eurolite.de
22
6
OPERATION
The LCD remote allows operating the machine in three modes (manual mode, continuous mode and timer
mode). With the wireless remote control it is possible to activate the fog output via radio over a distance of
25 meters. Alternatively, the machine can be controlled with a DMX controller. DMX control will take priority
over remote control operation.
Switching on and off
1
Switch on the machine with the power switch (lights up). The display shortly
indicates “
WELCOME “. Then the machine starts with the warm-up process and the
display indicates “ WARMING UP “.
2
While the unit is warming up, fog output will not be possible yet. Program the
necessary menu settings with the control panel. Once the warm-up process is
completed, fog output will be possible. The display indicates “
READY TO FOG “.
Additionally, a “ W “ for wireless and an “ S “ for fluid sensor is indicated if these
functions are activated.
3
After operation, switch off the machine with the power switch.
The output nozzle will heat up during operation. Therefore do not touch the
nozzle until it has cooled down completely!
Prior to transportation, allow the machine to cool down and completely empty
the tank.
Never operate the fog machine without fog fluid. Fire hazard due to
overheating! Besides, the unit may be damaged.
During operation smoke emission may stop. In this case the device is heating
up again. After a short period, the machine will be ready to emit fog again.
This process guarantees an appropriate vaporization temperature and the best
fog emission possible. The temperature is regulated by a high-quality
thermostat.
Remote Control
The remote control is equipped with 6 operating buttons and an LCD screen displaying all operation statuses
of the machine. All current operating parameters are automatically stored in non-volatile memory, allowing
the machine to be powered down without losing function settings. The remote control is connected to the
machine via a 3.5-meter long cable. To facilitate handling, loosen both screws and remove the module.
Button Function
FUNCTION Selects functions
UP/
DOWN
Selects options/
setting values
TIMER
Timer mode
VOLUME Continuous mode
MANUAL
Manual mode
FUNCTION UP DOWN
TIMER VOLUME MANUAL