00116794, Version 1.0
49/56
Playing Chases
A chase must be programmed before you can run it. Chases can be played manually, time-controlled or
sound-controlled.
Manual Mode
1. When you turn on the device, it is automatically in manual mode.
2. Call the desired chase with the buttons
CHASE
1-6
. They are played one
after the other.
3. Use the
FADE TIME
control to set the fading time of the current scene.
4. With
BANK UP/DOWN
you can call the steps of the chase one by one.
Automatic Mode
In automatic mode, the scenes stored in a memory bank will be played time-controlled in a loop. The number
of repetitions is adjustable.
1. Press
AUTO/DEL
to enable the Auto mode. The LED
AUTO
then indicates
that the mode is active.
2. Call the desired chase with the buttons
CHASE
1-6
. Press the button again
to stop the chase. It is possible to select several chases simultaneously.
They are played one after the other. The control LED of the chase currently
playing flashes, the others light.
3. Use the
WAIT TIME
control
to adjust the running speed and the
FADE TIME
control
to adjust the fade time.
Note: Repeatedly press
TAP/DISPLAY
for a more precise input of the
running speed. The interval of the last two respective keystrokes defines the
speed. When using this function, all settings made with the WAIT TIME
fader are being ignored, as long as you do not move it.
4. Use the buttons
BANK UP
and
BANK DOWN
to adjust the number of
repetitions for the chase. A Chase can be repeated between 1 and 20
times.
