00116794, Version 1.0
41/56
9. Once the programming is completed, press
PROGRAM
for three seconds. The
LED PROGRAM goes out and indicates that you have quit the programming
mode.
Example:
Program scanner 1 with eight scenes in which channels 1 - 8 are successively set to 100 %. Save
the scenes in bank 3.
1. Enable programming mode.
2. Press SCANNERS 1 to turn on its fader control.
3. Press PAGE SELECT to select page A.
4. Slide fader 1 all the way up.
5. Press MIDI/REC.
6. Select bank 3 using the BANK UP/DOWN buttons.
7. Press SCENES 1.
8. Repeat steps 4 - 7 until all eight scenes are stored in bank 3.
9. Press SCANNERS 1 again to disable the scanner again.
10. Press PROGRAM for three seconds to quit programming mode.
Editing Scenes
1. Enable programming mode.
2. Use
BANK UP/DOWN
to select the bank with the scene you want to edit.
3. Use the
SCENES
buttons to select the desired scene.
4. Make the desired changes using the faders and/or joystick.
5. Press
MIDI/REC
to save the changes.
