EuroLite AKKU Wash 1 HCL Spot, Руководство пользователя

Страница: 15 / 16

00089303.DOC, Version 1.0 15/16
EUROLITE IR-7 remote control
1
The device must be activated for remote control. For this, set menu item IR Setup to
On.
2
When actuating a button, always hold the remote control in the direction of the
sensor. There must be visual connection between the remote control and the sensor.
3
The remote control is supplied with a battery inserted. An insulating foil between the
battery and the battery contacts prevents the battery from being discharged during
storage. Prior to the first operation remove the foil from the battery support on the rear
side of the remote control. Otherwise operation of the remote control is not possible.
4
If the range of the remote control decreases (10 meters as a
maximum), replace the battery. For this purpose, on the rear
side of the remote control press the small bar with the groove
to the right and at the same time remove the battery support.
For operation, one 3 V button cell type CR 2025 is required. When inserting, pay
attention that the positive pole of the button cell shows upwards in the support.
CAUTION!
Danger of explosion when battery is replaced improperly. Only replace by the same type.
Please dispose of old and used batteries properly. Batteries are hazardous waste and should
not be disposed of with regular domestic waste!
Not all functions on the universal remote control are applicable to this device.
No. Key Function Step 1 Step 2 Step 3 Description
1 BLACKOUT BLACKOUT any button Blackout
2 STROBE STROBE +/-
Strobe effect - available for the buttons
AUTO/SOUND/FADE/MANUAL/R/G/B/A/UV/W/0 - 9
3 SPEED SPEED +/-
Select the desired speed
Internal programs
4 SENSITIVITY SENSITIVITY +/-
Microphone sensitivity
Sound controlled mode
5 % % +/-
Dimmer -available for the buttons AUTO/SOUND/
STROBE/FADE/MANUAL/R/G/B/A/UV/W/0 - 9
6 +/-
AUTO/SOUND/
STOBE/
SPEED/
SENSITIVITY/%
/FADE/
MANUNAL/
/R/G/B/A/UV/W
+/- Increasing/Decreasing
7 AUTO
Function
1
AUTO +/- Internal programms
… 2 AUTO SPEED +/- Desired speed
… 3 AUTO STROBE +/- Strobe effect
… 4 AUTO % +/- Dimmer
8 SOUND
Function
1
SOUND +/- Sound controlled mode
… 2 SOUND SENSITIVITY +/- Microphone sensitivity
… 3 SOUND STROBE +/- Strobe effect
… 4 SOUND % +/- Dimmer
9 FADE
Function
1
FADE +/- Fading
… 2 FADE SPEED +/- Desired speed
… 3 FADE STROBE +/- Strobe effect
… 4 FADE % +/- Dimmer
10 MANUAL
Function
1
MANUAL R/G/B
… 2 MANUAL +/- Manual Setting R/G/B values
… 3 MANUAL R/G/B/A/UV/W +/- Dimmer intensity of LED colors
… 4 MANUAL STROBE +/- Strobe speed
… 5 MANUAL % +/- Dimmer
11 R/G/B/A/UV/W
Function
1
R/G/B/A/UV/W +/- Manual Setting R/G/B values
… 2 R/G/B/A/UV/W STROBE +/- Dimmer intensity of LED colors R/G/B
12 Number:0-9
Function
1
Number:0-9 Static colors
… 2 Number:0-9 STROBE Strobe effect