00133036, Version 1.0
33/44
OPERATION
Switch on the device with the power switch. The unit requires a short initialization process and is then ready
for operation.
The display lights up and you can choose the desired mode via the buttons of the Control Board.
The device has two operating modes. It can be operated in stand-alone mode via the control board and the
EUROLITE IR-13 remote control or in DMX-controlled mode via a standard DMX controller and wireless via
QuickDMX with suitable wireless transmitter.
Stand-alone mode
In the stand-alone mode, you can do without a controller. Disable QuickDMX and call the desired setting.
Please refer to the instructions under Control Board.
Master/Slave operation
The master/slave operation enables that several devices can be synchronized and controlled by one master
device.
Set the master device and each slave device to the same transmission channel. For this purpose, press the
ID button on the device, to change the transmission channel and pair the devices.
The selected transmission channel is indicated by the status indicator.
Channel
Color
1
Red
2
Green
3
Blue
4
Yellow (red/green)
5
Cyan (green/blue)
6
Magenta (red/blue)
Choose the device which is to control the effects. This device then works as master device and controls all
other slave devices.
Set the master device to the desired mode. Set the slave mode (SL.AU) on every slave device. Please refer
to the instructions under
Control Board
.
Содержание AKKU Bar-3
Страница 1: ......
