Using Your Floor Steamer
13
Using Your Floor Steamer
WARNING: Let Steamer cool 5 minutes before opening Boiler Cap. Use
care when opening Boiler Cap as it may still be hot and steam may
escape, causing burns. If Boiler is still hot, water may spurt out during
refi lling which can also cause burns.
• Always use ordinary tap water.
• If tap water is too hard, use distilled or demineralized water to avoid
the risk of mineral deposits and sediment from forming.
• Do not add detergents, perfumes, oils or other chemical substances to
the Boiler. This will damage the Steamer and void the warranty.
• The green Steam Ready Indicator Light may turn on and off during use.
This is normal and not a fault.
REMINDERS
Do not overfi ll the Boiler as excess water will be fl ushed out of the Boiler
before dry steam will emit.
*
IMPORTANT
*
• Unplug the appliance from the electrical power outlet. This will stop
the Steamer from continuing to heat up.
• Slowly turn the Boiler Cap counterclockwise, ensuring that no
steam is present.
• Be sure Steamer has cooled 5 minutes before refi lling with water.
The product warranty will be null and void if
anything other than water is added to the
Boiler.
• Pour in 600 mls of water using the Measuring
Cup and Filler Funnel provided – fi ll the
Measuring Cup to the 200 ml marking 3
times. Be careful not to overfi ll the Boiler.
• Replace Boiler Cap by turning it clockwise.
Do not tighten Boiler Cap too much – fi nger
tightening is suffi cient to lock the steam in
the Boiler.
• Insert plug into 3-prong electrical outlet. Wait for green Steam
Ready Indicator Light to turn on. Steamer is ready to use once
again.
100 ml
200 ml
A N
T
(M
a
