Before Use
9
Before Use
B. Attach Cleaning Pads to Steamer
WARNING! To prevent fl oor damage, ALWAYS attach either the
Microfi ber Floor Pad or the Carpet Glide Accessory with Carpet
Pad when using your Floor Steamer. NEVER USE WITHOUT EITHER
OF THESE ATTACHMENTS AFFIXED TO THE MACHINE.
ATTACHING SCRUBBING FLOOR PAD
Scrubbing Floor Pad – Place Microfi ber Floor Pad
face down on the fl oor, wide side forward, with
center Scrub Strip facing down (and positioned to
match metal heat plate on bottom of Base-see “A”).
Hold Floor Steamer about 2” above Pad and gently
place Floor Steamer on the Pad. Firmly press down
to ensure Pad is adhered to the Floor Steamer.
ATTACHING CARPET GLIDE WITH CARPET PAD
Place Carpet Glide face up on fl oor. Center and
place Carpet Pad on top of Carpet Glide. Hold
Floor Steamer over Carpet Glide and gently lower
the Steamer onto the Glide. Make sure the 4 clips
on Glide are around the outside of the Steamer
Base and using hands, attach the 4 clips of the
Carpet Glide to the Steamer Base.
USE ON HARDWOOD FLOORS – For hardwood fl oors,
use only on “sealed” hardwood surfaces.
Move Steamer forward and backward while
cleaning, carefully observing the amount of steam
used, as too much water could cause damage.
Steam can cause wax to be stripped from, and consequently damage, some
varieties of linoleum fl ooring. ALWAYS test a small, inconspicuous portion of the
fl oor BEFORE using steam to ensure that your linoleum fl oor does not have this
issue. For some varieties of linoleum or vinyl fl oors the fl oor steamer is harder to
push forward and back.
NOTE: See “Maintenance & Cleaning” for care and cleaning instructions for
Microfi ber Pads.
*
IMPORTANT NOTE ABOUT LINOLEUM FLOORING
*
A -
Heat Plate on
bottom of Base
boosts the cleaning
performance.
