manualshive.com logo in svg

EUROCOM 8500 DeskNote, Руководство пользователя, Страница: 5 / 100

Поделиться
Скачать
EUROCOM 8500 DeskNote Скачать руководство пользователя страница 5

10. Do not allow foreign matter to enter the system. 
 
11. Do not attempt to service this product yourself.  Opening or 

removing covers may expose dangerous voltage points.  Refer 
all repair work to qualified service personnel. 

 
12. Unplug this product from the wall outlet, do not operate it, and 

immediately seek proper servicing if: 

 

•

  The power cord or plug is damaged or frayed. 

•

  Liquid or foreign matter has entered this product. 

•

  This product has been exposed to rain or water. 

•

  This product has been dropped or damaged. 

•

  This product exhibits a distinct change in performance, 

indicating a need for service. 

 
13. Do not use any battery pack other than the one specifically 

designed for this system.  Batteries may explode or leak if 
exposed to fire or improperly handled or guarded.  Refer battery 
replacement to your dealer or qualified service personnel. 

 
14. Only use UL listed/CSA certified, type SVT/SJT power cords 

rated 6A 250V minimum (VDE approved or equivalent).  It 
should be a detachable type with a minimum length of 6 feet. 

 
15. Adjust only those controls that are covered by these operating 

instructions.  Improper adjustment of other controls may result in 
serious damage to the system which is not covered by the 
warranty. 

 
 

Содержание 8500 DeskNote





































































































Отзывы:

Нет отзывов