EUROCOM 8500 DeskNote Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 100

EUROCOM 8500 DeskNote Скачать руководство пользователя страница 4

Important Safety Instructions

Please read and follow these important instructions.

1. Follow all warnings and instructions marked on this product.

2. Unplug this product from the wall outlet before cleaning it or

connecting peripheral devices.

3. Use a damp cloth with mild soap to clean this product. Do not

apply cleaner directly to the unit. Do not use volatile or abrasive
cleaners on this product.

4. Do not place this product on an unstable surface where it may

fall.

5. Do not block or cover the system’s ventilation openings. Also,

never place this product near or over a radiator or heat register,
or in a built-in installation unless adequate ventilation is
provided.

6. Operate this product in accordance with its rated power

specifications. If you are unsure of your local power
specifications, consult your dealer or local power company.

7. This product is equipped with a 3-wire grounding type plug.

This is an important safety feature; do not defeat its purpose. If
you do not have access to such power, have a qualified
electrician install a proper outlet.

8. Do not allow anything to rest on the power cord. Do not locate

this product where persons will likely walk on the cord.

9. If an extension cord is used with this product, make sure the

total current drawn by the products plugged into the extension
cord do not exceed the extension cord or outlet power ratings.

«
...
2
3
4
5
6
...
»

Содержание 8500 DeskNote





































































































Отзывы:

Нет отзывов