EUROCOM 8500 DeskNote Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 100

EUROCOM 8500 DeskNote Скачать руководство пользователя страница 44

Using Hard Disk Drive

The hard disk drive of the Notebook can be removed since it is
mounted on a removable case. The case can house any 2.5” IDE
hard disk drive with a height of 12.7mm. The system supports
drives with capacities greater than 528MB through the Logical
Block Addressing (LBA) mode. It also supports Programmed I/O
(PIO) mode 4 and provides high performance data transfer rate at
speed up to 33 MBytes/second (ATA-33).

Removing

1.  Turn the system power off.
2.  Turn the Notebook over.
3.  Locate the Hard Disk Drive latch.
4.  Press the latch in the illustrated direction and slide the hard disk

drive out of the Notebook (Figure 2 -11).

Figure 2-11

Inserting

When inserting the hard disk drive back into the Notebook, be sure
to seat the hard disk drive firmly. You will feel the drive click into
position when it is seated properly.

2-14

User’s Manual

«
...
42
43
44
45
46
...
»

Содержание 8500 DeskNote





































































































Отзывы:

Нет отзывов