Euroboor ECO.55 Series, Руководство пользователя

Страница: 31 / 39

31
7. Trouble shooting
Magnet and motor do not
function - The magnet switch is not connected to the power supply
- Damaged or defective wiring
- Defective fuse
- Defective magnet switch
- Defective control unit
- Defective power supply
Magnet does function, the motor
does not work - Damaged or defective wiring
- Carbon brushes are stuck or worn out
- Defective magnet switch
- Defective On / Off switch
- Defective control unit
- Defective armature and/or field
Magnet does not function, the
motor does - Defective magnet
- Defective wiring of magnet
- Defective control unit
Annular cutters break quickly,
holes are bigger than the annular
cutter - Clearance in the guide
- Bent spindle
- Shaft extending from the motor is bent
- Bent pilot pin
Motor running roughly and/or
seizing up - Bent spindle
- Shaft extending from the motor is bent
- Triangular guide not mounted straight
- Dirt between spindle and triangular guide
Motor starts running when
magnet switch is turned on - Damage or defective relay in control unit
Motor making a rattling sound - Gear ring (bottom of the armature) worn out
- Gear(s) worn out
- No oil in gearbox
Motor humming, big sparks and
motor has no force - Armature damaged (burned)
- Field burned
- Carbon brushes worn out
Motor does not start or fails
- Damaged or defective wiring
- Dirt in sensor control unit
- Defective or loose magnet on top of armature
- Damaged or defective (sensor) control unit
- Damage to armature or field coil
- Damaged or defective carbon brushes
Guiding takes a great deal of
effort - Guide is set too tight
- Guide is dry, needs to be greased
- Guide/gear- rack/rotation system dirty or damaged
Insufficient magnetic force - Damaged or defective wiring
- Bottom of magnet not clean and dry
- Bottom of magnet not flat
- Workpiece is not bare metal
- Workpiece is not clean or flat
- Workpiece is less than 6 mm (too thin)
- Defective control unit
- Defective magnet