Euroboor ECO.55 Series, Руководство пользователя

Страница: 21 / 39

21
Power surge protection
The machine is able to cope with voltage spikes up to
4,000V (1-2 μs )
.*
Power fluctuation protection
The machine is able to cope with voltage and frequency fluctuations ranging from:
110 Volt to 130 Volt - 45 Hz to 65 Hz
220 Volt to 240 Volt - 45 Hz to 65 Hz
When the frequency is too high or too low, so it falls outside of above mentioned range, the motor
will not start. If the frequency of the power supply falls outside the range or fluctuates strongly
during your drilling job, the motor will shut off automatically.*
* Disclaimer: Euroboor is not liable for any damage caused to the machine due to electrical
problems in the workplace. Above mentioned protection is not guaranteed in all cases of voltage
and frequency spikes or fluctuations. Euroboor accepts no liability when it comes to the power
surge or fluctuation protection not functioning or functioning poorly.
In the situation of the motor being shut off automatically as self-protection, you should:
- Shut off the magnet;
- Disconnect the machine from the power source;
- Fix the source of the problem, by either;
o
Making sure the issues with the power source is fixed;
o
Connect the machine to a different and reliable power source;
- Continue using the machine as described in this user manual.
4.10 Overload protection and Smart restart
This machine is equipped with an electronic display, showing:
- Used motor power;
- LED indicators.
1. Switch on the electromagnet. All LED indicators shortly light up and you hear a beep;
2. Switch on the motor and start drilling. When the tool first touches the workpiece the used
motor power shown in the display increases and can be increased or decreased by raising or
reducing the pressure on the feed handles.