3
2 - Safety
1.
During any work on non-horizontal components, the machine must always be secured with the
supplied safety chain.
2.
The magnetic drilling machine may only be used on a flat and clean foundation.
3.
If the machine or the lead show signs of damage, the magnetic drilling machine must be switched
off immediately.
4.
Wearing safety glasses, hearing protection and protective clothing is necessary.
5.
Do not wear any loose clothing or jewellery that may get entangled in the moving parts of the
magnetic drilling machine.
6.
Use only accessories or parts that are recommended by Euroboor.
7.
During drill operations, the hole cutter must be cooled and lubricated with good quality cutting or
lubrication oil.
8.
The motor must be switched off when tightening the machine with the safety chain.
9.
When changing a hole cutter, the magnetic drilling machine must be disconnected from power
supply.
10.
Clean the area around the machine regularly. Keep the bottom of the magnet and keep it clean and
dry.
11.
Regularly inspect whether all screws, nuts and bolts are tight.
12.
Remove the burr or slug from the hole cutter after each hole. Caution, the part may be hot!
13.
Before using the machine make sure it is connected to the correct voltage and that all grips and
parts are tightly attached.
14.
When using the drill on non-horizontal surfaces, you must use a drilling compound or cutting paste.
15.
Do not use oil because the oil can drip into the motor unit.
When using this machine, you MUST wear ear and eye protection.
Euroboor has included these articles as standard accessories for your own
safety. Do NOT touch the drill when it is running.
Always follow the
recommendations for personal protection when using this tool.
Содержание ECO.100/4
Страница 14: ...14...