Euroboor ECO.100/4, Руководство пользователя

Страница: 7 / 14

7
Drill Chuck Assembly
The option of making our machines suitable for the use of standard spiral drills and other tools by using a
cylindrical shaft is an important characteristic of Euroboor magnetic drilling machines. Please see the
technical data for maximum capacity.
Installation of 13mm Chuck by using adapter IBK.14
The IBK.14 is a adaptor from 1/2"x20 UNF to 3/4" Weldon.
Attach a Drill Chuck (like Euroboor IBK.13) with internal 1/2"x20 UNF on the IBK.14 adaptor.
To attach the assembly into your Spindle, follow the instructions (with exception of the Pilot Pin) for
installation of a Hole Cutter. Adaptor IBK.14 can be used on most machines in our program.
Installation of 13mm Chuck directly on the motor unit
For the ECO.80 and ECO.100/4 magnetic drilling machines it is possible to install a drill Chuck directly to
the shaft extending from the motor unit. Attach to the drill chuck with article number IBK.13-B16 a adaptor
with article number B16-MC3. This way the drill chuck can be mounted as a Morse Conus in your machine.
4 - The Magnetic Drilling Machine
The Magnetic base
Material of minimum 10mm thickness is required for the magnet to work the best.
The attachment force generated by the magnet depends on various factors.
- Thickness of the material the magnet is placed on
- Paint or coating of the material the magnet is placed on.
- Metal chips, oil or other dirt under the magnet.
If the LED indicator lights up GREEN, the magnet is generating sufficient attachment force. If the LED
indicator lights up RED, the magnet may not generating sufficient attachment force.
We would like to point out that this is only an indication and not a certainly that the magnet will not
release from the material. Euroboor accepts no liability ensuring from the magnet indicator not
functioning or functioning poorly.
Make sure that the magnet attaches tightly to the work piece before turning on the motor unit of the
magnetic drilling machine. Euroboor magnets have 2 coils; make sure that both coils are in contact with
the material. Do not connect any other machines to the electrical outlet the magnetic drilling machine is
plugged into, as it may result in the loss of magnetic force. Always use the safety chain included. Drilling
above your head is extremely dangerous and is not recommended. For the use of magnetic drilling
machines on pipes, not-flat or non-magnetic materials, we refer to our brochure or our website
www.euroboor.com where several vacuum tightening systems and pipe clamping systems are mentioned.