www.euroboor.com
24
4.5 Adjusting the blade guidance
For the machine to make high quality cuts it is important
that the saw band is stable and not vibrating too much.
To avoid vibrations of the saw band, the machine is
equipped with an adjustable blade guidance system.
The blade guidance has multiple functionalities at once. Due to the sliding feature, the guiding
protects the part of the blade that is not in use. Besides this it also puts extra tension on the
saw band preventing it from vibrating.
How to adjust:
1.
Clamp the workpiece onto the machine.
2.
Loosen the screw on the blade guidance system by turning it counter-clockwise. This
will remove some tension from the blade.
3.
Slide the blade guidance system backwards or forwards, until it reached just outside
the clamp (Refer to image 4-5).
4.
Now tighten the screw on the blade guidance system, tensioning the blade.
4.6 Adjusting the distance set bracket
When cutting several pieces at the same length, the Distance Set Bracket is a tool that
prevents you from measuring each and every piece again. Set the bracket to the desired length
once, and all pieces will be cut at the same length. Refer to
“3.1.2 Fitti
ng the distance set
bracket”
for how to instal and use the tool.
Image 4-5
