background image

FOR REPLACEMENT FILTER INFORMATION

for Model EP722

GETTING TO KNOW  YOUR VACUUM

Call:

1-866-98SHARK (1-866-987-4275)

Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time

or

visit our website: www.sharkvac.com

Replacement HEPA filter SKU# XSH722

FOR TECHNICAL SUPPORT

for Model EP722

In U.S.:   1 (866) 805-6850

Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time

Please Note:

The HEPA Dust Cup Filter may be washed. We recommend that this be done once a 

month or when suction appears reduced .

To wash your HEPA Dust Cup Filter, hold filter cartridge by frame flange, flange side 

up and rinse under water. When finished, shake off excess water. Do 

NOT

wash in 

dishwasher.

It is important that when you wash the HEPA dust cup filter, you allow it to air dry 

COMPLETELY

before using again. We recommend 24 hours to air dry. 

DO NOT DRY 

IN DRYER

.

IMPORTANT

: Both the Pre-Motor and the Micro Exhaust filters should be replaced 

every 6 months or sooner if required.

All filters should be checked regularly for signs of damage, preferable after each 
cleaning task. The filters must be replaced immediately if they become damaged.
Always disconnect the vacuum from the electrical outlet when checking the filters.

1. Hose
2. Cord Rewind Button 
3. Power On/off Button
4. Handle
5. Dust Cup
6. Air Intake Duct
7. Air Driven Turbo Brush
8. Dust Cup Handle

9. Telescopic Tube
10.Floor to Carpet Brush
11.Hand Held Air Driven Turbo Brush
12.Upholstery Brush
13.Dusting Brush
14.Crevice Tool
15.Shoulder Strap

Important

:

This vacuum cleaner is equipped with a motor protective thermostat. If for some 
reason your vacuum overheats, the thermostat will automatically turn the unit off. 
Should this occur, unplug the vacuum from the wall outlet and turn off the switch. 
Empty the dust cup, "TapClean" the dust cup filter and check for blockages in hose 
and suction inlet. Allow the unit to cool for a minimum of 45 minimum prior to restarting 
the unit. To restart, re-plug the vacuum into the wall socket and turn the switch back 
on.

Technical Specifications

Voltage:

120V.,  60Hz.

Power:

10.8 Amps, 1300 Watts

2

9

Отзывы: