PRECAUTIONARY MEASURES
OPERATING INSTRUCTIONS
Flat & Upright Parking Position
Motor Thermostat
Important
:
If the suction opening of the unit, the hose or the chrome telescopic tube
are
BLOCKED
, switch off the vacuum cleaner and remove the blocking
substance before you start the unit again.
Important
:
This vacuum cleaner is
equipped with a motor protective
thermostat. If for some reason your
vacuum overheats, the thermostat will
automatically turn the unit off. Should this
occur, unplug the vacuum from the wall
outlet and turn off the switch. Empty the
dust cup, "TapClean" the dust cup filter
and check for blockages in hose and
suction inlet. Allow the unit to cool for a
minimum of 45 minimum prior to
restarting the unit. To restart, re-plug the
vacuum into the wall socket and turn the
switch back on.
Please note that your vacuum cleaner
can be conveniently placed in a space
saving vertical parking position or in a
convenient flat parking position.
1.
Place unit on its side. Slide floor
nozzle into locking position with
receptacle which rests on top of unit.
2.
While laying flat on 3 wheels, slide
floor nozzle into locking position
with receptacle which rests on the
rear side of the unit.
4.
When pulling out the power plug
from the wall outlet, pull the plug
not the power cord.
1.
Do not operate the vacuum
cleaner too close to heaters or
radiators.
Attaching the Shoulder Strap
5.
Do not pick up anything that is
burning or smoking such as
cigarettes, matches or hot ashes.
Use the hooks to attach the shoulder
strap to the vacuum cleaner.
First pass the flexible hose through
the loop of the shoulder strap and
then attach the two hooks to the
strap hookup holes at the bottom of
the vacuum cleaner as shown in
illustration below.
2.
Before inserting the power plug
into the wall outlet, make sure that
your hands are dry.
6.
Do not use without all filters in place.
3.
Before you start vacuuming,
make sure to remove large or
sharp objects that might
damage the dust bag.
Note:
This vacuum cleaner is equipped
with a plug and power cord that retract
automatically. If the cord or plug get
damaged, it must be replaced by a
qualified technician.
Warning:
Hold the plug when
rewinding the cord. Do not allow the
cord to whip when rewinding.
3
8
