Troubleshooting
WARNING:
to reduce the risk of electric shock,
the power cord must be disconnected before
performing
maintenance/troubleshooting
checks.
Vacuum will not run.
Vacuum is not picking up dirt.
Vacuum pushes scatter rugs (lightweight, movable rugs) on
Power Switch position “II – Brush Roll on.”
Brush roll does not turn on.
Vacuum turns off on its own.
Airflow is restricted.
Check to see if plugged in properly.
Check circuit breaker/fuse.
Check On/Off switch.
If vacuum still does not run, see
Resetting the Motor
Thermostat
Check the Dust Cup.
Check the Foam Filters.
If the Dust Cup and Filter don’t require cleaning, check for
blockages, see
Checking for Blockages
on the next page.
Move Power Switch setting to position “
I – suction only
” to
disengage the Brush Roll.
Pull handle toward you and release the Floor Power Nozzle to
disengage the auto-off feature.
Select Power Switch position “
II – Brush Roll on
.”
If red light is illuminated on the Floor Power Nozzle, see
Checking for Blockages
on next page.
Motor Thermostat needs to be reset; see
Resetting the Motor
Thermostat
Check for blockages; see
Checking for Blockages
on
next page.
Check attachments for suction strength; clear blockages,
as required.
Clean the Dust Cup, Cyclonic Chamber and the Foam Filters.
Problem
Suggested Action
Содержание Infinity NV22-FS
Страница 1: ...Owner s Guide NV22 FS NV22C FS...
